THE COMPLETE EVERGREEN "TRU-FLEX" SURFACING SYSTEM FOR NEW AND OLD COURTS


"Tru-Flex" Crack-filler (Resurfacing old courts)
Designed to resist expanding and contracting hairline cracks.

"Tru-Flex" Patch-binder (Resurfacing old courts)
Designed to raise visible bird baths and repair surface damage.

"Tru-Flex" Filler
Over new asphalt pavement or existing worn surface with exposed asphalt. Apply 1 to 2 coats of "Tru-Flex" fibre re-inforced bitumen and acrylic emulsion, mixed with coarse silica sand to fill in surface voids and correct minor surface defects.

"Tru-Flex" Cusion. The shock-absorber (Optional luxury coats)
Typically apply 1 to 2 coats latex rubber base coats.

"Tru-Flex" Base. The first step towards an uniform playing surface.
Apply 1 to 2 coats comprising of an acrylic emulsion, rounded silica sands, fillers and fibres. Each layer is graded from coarse to fine with rounded silica sands.

"Tru-Flex" Sealer
Apply 1 to 2 coats comprising of an acrylic pigmented emulsion, fine grade rounded silica sands, fillers and fibres.

"Tru-Flex" Finish.  This is the topcoat of non-glare colour, which provide protection and resists scuffing.
Apply 1 to 2 coats, comprising of an acrylic high-concentrate pigmented emulsion, fillers and fibres, without sand, that will last for years and years.

Line Marking Paint. A high quality acrylic paint designed with the same expansion and contraction properties as the “Tru-Flex” system, providing a non-skid line, applied in one even application.

| Back |